| Customization: | Available |
|---|---|
| After-sales Service: | Available |
| Warranty: | 5 Years |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| UHMWPE Bins Lining Board UHMWPE Bed Liner sheet | |||
| Physical Properties | Test Method | Unit | Value |
|
Density
|
ASTM D792 | g/cm3 | 0.93-0.97 |
|
Water Absorption
|
ASTM D570 | ºC | <0.01 |
|
Mechanical Properties
|
Test Method | Unit | Value |
|
Tensile Strength
|
ASTM D638 | MPa | 40 |
|
Elongation, at break
|
ASTM D638 | % | 300 |
|
Flexural Strength
|
ASTM D790 | MPa | 24 |
|
Compression Strength, 10% Deformatio
n
|
ASTM D695 | MPa | 21 |
|
Hardness, Shore D
|
ASTM D2240 |
-
|
D66
|
|
Coefficient of Friction
|
-
|
- |
0.12
|
|
Thermal Properties
|
Test Method
|
Unit
|
Value
|
|
Heat Deflection Temperature
|
ASTM D648
|
ºC
|
47
|
|
Melting Point
|
ASTM D3412
|
ºC
|
135
|
|
Continuous Service Temperature
|
-
|
ºC
|
82
|
|
Electrical Properties
|
Test Method
|
Unit
|
Value
|
|
Surface Resistivity
|
ASTM D257
|
Ω-M
|
>10 15
|
|
Dielectric Constant 106Hz
|
ASTM D150
|
2.3
|
|
|
Volume resistively
|
ASTM D257
|
Ω*cm
|
>10 15
|
|
Dielectric strength
|
ASTM D604
|
kV/mm
|
45
|
Abosn is the leading company for UHMWPE Sheets in China, We can produce the UHMWPE Sheets as per customer demands, the color can be choosed based on your requirements, SIngle Color Sheet, Dual Color Sheet, both avalilble.
For UHMWPE properties, we can also produce both normal UHMWPE sheet and anti-UV UHMWPE Sheet as per different customer demands.
Ultra High Molecular Polyethylene (UHMWPE) occupies the extreme end of the polyethylene performance spectrum. With a molecular weight ranging from 3 to 7 million g/mol, UHMWPE liner polymer chains are 10 times longer thanconventional HIhg Density Polyethylene (HDPE)
UHMWPE(Ultrahigh molecular weight polyethylene) is a thermoplastic engineering material with high molecular weight and excellent performance.
On the whole, it almost focused on the advantages of all kinds of plastic, which has incomparable wear resistance, impact resistance, self-lubrication, corrosion resistance, low temperature resistance, sanitary nontaxicity, extremely high smoothness and low water absorption.
In fact, there is no single polymer material has so many excellent properties like UHMWPE material.
So, we provide UHMWPE liner in various shapes and sizes, which are available in different color such as Black, Grey, Natural, etc.
However, we offer in UHMWPE liner customized designs with distinct specifications in colors and dimensions.
UHMWPE lining sheets assist to reduce typical flow problems of bulk solids in bins, hoppers, chutes, truck beds and other applications. However, every application, brings with it unique challenges and places special demands on the plastic lining materials.
The unique molecular structure gives UHMWPE an expetional properties like below:
| Density : 0.92-0.96 g/cm3 | Abrasion resistance (sand slurry test) : 70% - 120% |
| Tensile strength at yield : 15-20 Mpa | Shore hardness D : 63-68 D |
| Notched impact strength : 80-170 kJ/m2 | Max.cont.temperature: 80ºC |
Abosn UHMWPE properties have met the full range of material flow, friction and wear challenge associated with bulk materials
Normal Standard Size:
| length(mm) | width(mm) | thickness(mm) |
| 2000 | 1000 | 5-300 |
| 2000 | 2000 | 5-300 |
| 2440 | 1220 | 5-200 |
| 3000 | 1500 | 5-200 |
| 3050 | 1220 | 5-200 |
| 3100 | 1050 | 5-200 |
| 3100 | 1500 | 5-200 |
| Size also can be customized based on your rquest | ||
Excellent properties for UHMWPE to handle bulk:
1. Very low dynamic friction coefficient
2. Extreme wear resisitance ( 200% higher than stainless steel )
3. Resistane to chemicals
4. Corrosion resistance
5. High impact strength ( up to 170 kj/m2 )
6. Service temperature range -260ºC to +80ºC
Benefis of Abosn UHMWPE as a lining:
1. No incrustations of bulk material
2. No bridging caused in hoppers
3. Faster bulk material flow
4. Cost of lining exist hopper with uhmwpe is one third of the cost of mild steel
5. UHMWPE is half the weight of steel, despite being three times as thick
Applications:
1. Chutes, Silos, Bins, Laundres for fines handling declaimer buckets conveyor skirting, truck beds liners, etc
2. Where the surface to be lined needs excellent flow ability and abrasion wear resistance
Q:Is the size fixed?
A:No.we can meet your needs according to your acquirement. That is to say, we accept to customize.
Q: What is your MOQ of this item?
A: 500 kilograms.
Q: Is it all right to make customer's own brand name?
A: That's all right to engrave your own brand name.
Q: What is your company's available production capacity?
A: Usually 9000 tonnes per year.
Q. Can you special order a product for me?
A. We are typically able to special order products for customers. OEM service .
We are really the manufacture you are looking for!
1.We have professional sales with rich experience of working to handle each order.
2.We undertand your concern and aim to give the best service.
3.We provide quick responses and fast turn-around times
After-sales service - ABOSN Product Quality is Guaranteed
1.We have Strict QC and make sure every step of processing is for specification compliance.
2.We track our goods from transportation to your sales in local market to help your successful business.
3.Manufactured in ISO 9001:2008 facility with over 20 years of manufacturing and fabricating experience.
If you break a pad under normal conditions, Abosn will replace it free of charge.
){kind=link}